trueten.de

... weil der Rubin schneller weg ist, als man denkt. Dann mal mit der Zodiac V6 CRB weiter machen, die liegt hier auch schon eine Weile und wartet auf solche Gelegenheiten.

On bad days, my robot hoover tries to overcome the legs of the clothes horse and sometimes fails. Then shit happened again.

The widespread solutions with "wings" or clothespins as an obstacle did not convince me, so I simply designed a few risers that can be clamped to the feet of the clothes horse. The only function is to raise the legs by 1 centimeter, which is enough to trigger the bumper on the vacuum cleaner.

The riser is designed for a pipe thickness of 16 millimeters and should also be able to be clipped onto thicker pipes. Thinner pipes are also possible, then simply wrap a little tape around the pipe a few times to give the riser a hold. Gaffa will do the job, or you can use a few drops of hot glue.

You can download the necessary files from my thingiverse or prusa3d account.

---

I hope the thing is useful for you. Some of the links are suggestions for parts to replicate the thing and affiliate. If you buy something, I get a small commission. The price you pay is the same. Thank you very much.

As some of you know, I hate nothing more than housework. Therefore, everything that is possible is automated here. For example vacuum cleaning. A Roborock S5Max is working on the floors in our lumber room, but what about the crumbs from the cake on the tablecloth? This is the job of the recently released MI Vacuum Mini Cleaner, an accu-powered mini cyclone vacuum cleaner that does its job well, but unfortunately comes without a wall bracket.

So I just broke a simple and hopefully functional design from the fence, which is based on the same of the Xiaomi designers. I say so now ... ;-)

However, here it is for your convenient use. I printed it with matte white Extrudr PLA NX2, which is beautiful and goes well with the matte finish of the cleaner. However, here it is for your convenient use. I printed it with matte white Extrudr PLA NX2, which is beautiful and goes well with the matte finish of the nipple. You don't need to use supports when printing, or you may have problems removing it from the cable duct in the floor. You can use the part with the two openings on the back that are intended for attaching the holder to the wall with two screws. By the way, the distance between the necessary holes would be 40mm.

Have fun with printing and always good 1st layer adhesion ;-)

---

I hope the thing is useful for you. Some of the links are suggestions for parts to replicate the thing and affiliate. If you buy something, I get a small commission. The price you pay is the same. Thank you very much.

1st published @ thingiverse

Seit einigen Wochen nervt mich ein dauerhaftes Provisorium ™ an einer Fräse. Ein Hallsensor greift die Drehzahlen der Spindel ab, gleichzeitig soll ein China LED Ring den Ort des Geschehens adäquat ausleuchten. Viel Platz ist auch ein Fremdwort. Also alle Werte in FreeCAD eingegeben, einmal Enter gedrückt und fertig ist die Laube. Oder so ähnlich. Bevor ich das als Aluteil fertige, soll der 3D Drucker mal den Prototypen runterlassen.