Skip to content

F*45 Flange One

The bottom of the flange
The 4 Axis digital display (DRO) from Ditron, I installed on my milling machine (Chinese F * 45 class) enables the RPM to be displayed during machining. Unfortunately it is a little tricky to attach the Hall sensor used for this to the spindle in such a way that it can pick up the signals from the magnet, which functions as a transmitter, without disturbing the work.
I also like to use anLED ring lightto illuminate the work area of the tool. So it made sense for me to combine both and cobble together an adapter flange. Maybe someone else can use the part. I printed withSpectrum PLA Proon myAnyCubic I3 Mega.

Available at thingiverse and prusaprinters.org

Releasenotes:
Initial Version 2.1

Sonntagsarbeit

Seit einigen Wochen nervt mich ein dauerhaftes Provisorium ™ an einer Fräse. Ein Hallsensor greift die Drehzahlen der Spindel ab, gleichzeitig soll ein China LED Ring den Ort des Geschehens adäquat ausleuchten. Viel Platz ist auch ein Fremdwort. Also alle Werte in FreeCAD eingegeben, einmal Enter gedrückt und fertig ist die Laube. Oder so ähnlich. Bevor ich das als Aluteil fertige, soll der 3D Drucker mal den Prototypen runterlassen.

7x7.3 Dragchain ends

Screenshot: FreeCAD
With my small 3D router, the cables of the milling spindle are to be laid in a drag chain. Since I am extremely stingy economical and therefore like to recycle leftovers, I used a leftover piece of a 7×7.3 drag chain. Since the ends of the other part of the drag chain are installed elsewhere, I just scribbled and printed out 2 ends in 3D. Fits.

The parts can be downloaded from Dingsbums.


Some of the links are suggestions for parts to replicate the thing and affiliate. If you buy something, I get a small commission. The price you pay is the same. Thank you very much.

cronjob