Skip to content

#3dPrinting: Durst M605 Reproadapter

The repro adapter mounted on the column of the M605 with the camera attached.
The repro adapter mounted on the column of the M605 with the camera attached.
For my Durst M605 colour enlarger I needed an adapter to attach a camera to the column and thus be able to use the enlarger as a very accurate repro stand. Unfortunately, the existing solution for the M670 from oet does not fit, and I also find it quite difficult to print. So I constructed a new adapter from scratch that uses their camera mount, so that if you own both enlargers - which is quite pointless but nevertheless possible - you can continue to use them. The adapter itself follows simple shapes and can be printed without supports. For the attachment to the boom you need a M8x30mm hexagon screw and the star knob from samyp.

Download my adapter at thingiverse.

For the mounting of the adapter and the camera holder you still need

1x M8x30mm hex bolt and a M8 hex nut
2x M6 x25 nuts and countersunk screw
1x M4 x 30 nut and screw
1x 1/4" screw


Slightly changed dimensions (depth of the groove for the nuts)
Alignment of the adapter on the column facilitated by added indicator arrow


No Trackbacks


Display comments as Linear | Threaded

No comments

Add Comment

E-Mail addresses will not be displayed and will only be used for E-Mail notifications.
To leave a comment you must approve it via e-mail, which will be sent to your address after submission.

To prevent automated Bots from commentspamming, please enter the string you see in the image below in the appropriate input box. Your comment will only be submitted if the strings match. Please ensure that your browser supports and accepts cookies, or your comment cannot be verified correctly.

Enclosing asterisks marks text as bold (*word*), underscore are made via _word_.
BBCode format allowed
Form options

Submitted comments will be subject to moderation before being displayed.