Skip to content

#3dPrinting: Durst M605 Reproadapter

The repro adapter mounted on the column of the M605 with the camera attached.
The repro adapter mounted on the column of the M605 with the camera attached.
For my Durst M605 colour enlarger I needed an adapter to attach a camera to the column and thus be able to use the enlarger as a very accurate repro stand. Unfortunately, the existing solution for the M670 from oet does not fit, and I also find it quite difficult to print. So I constructed a new adapter from scratch that uses their camera mount, so that if you own both enlargers - which is quite pointless but nevertheless possible - you can continue to use them. The adapter itself follows simple shapes and can be printed without supports. For the attachment to the boom you need a M8x30mm hexagon screw and the star knob from samyp.

Download my adapter at thingiverse.

For the mounting of the adapter and the camera holder you still need

1x M8x30mm hex bolt and a M8 hex nut
2x M6 x25 nuts and countersunk screw
1x M4 x 30 nut and screw
1x 1/4" screw

Updates
2022/11/28:

Slightly changed dimensions (depth of the groove for the nuts)
Alignment of the adapter on the column facilitated by added indicator arrow


cronjob